I’ve been wanting to try Karakuri Packing for a while now and I recently had to the opportunity to acquire one from a kind soul on the Mechanical Puzzle Discord (MPD). Now I can see why others gave it high marks and why it received a Jury Honorable Mention award in the Nob Yoshigahara Puzzle Design Competition at the 40th International Puzzle Party (IPP). It’s so good!
Karakuri Packing is a 3D apparent-cube, restricted-opening packing puzzle designed by Yasuhiro Hashimoto. It consists of 5 pieces that need to be packed within a 3x3x3 box. The pieces are comprised of 26 voxels leaving 1 voxel unaccounted for. Oh, what could that mean? Well, one piece has a dowel sticking out less than a width of a voxel. But there are also 5 holes drilled into the pieces and 2 additional dowels that have to be packed as well (yes, yes, you can argue that there are really 7 pieces that have to be packed in the box). Each of the free dowels is just short of 2 voxels. 5 holes and 5 voxels’ worth of dowel. Coincidence or trap?
To complete the challenge, the box has a 2x3 voxel opening on the top. For the version that I received, the 1x3 voxel lip on the box is removable which allows the pieces to be packed in an incorrect configuration. Or you could store it in the correct configuration and be able to dump and scramble the pieces without seeing how they would emerge from the box.
Attempting to determine what novel ideas could be used, I brainstormed some that were not used. But more importantly, there were moves that I didn’t anticipate. I was very happy to see these unexpected interactions.
My solve was done in 2 short sittings, The first to convince me that it wasn’t going to be easy. The second to show me that it wasn’t as difficult as my impression from the prior attempt. Although there are many assemblies, there are things that reduce the complexity such as the opening restricting the orientation of the pieces and holes needing to be aligned to support the dowels. Definitely a fun puzzle and I wouldn’t mind seeing other puzzles in this format.
Although I’m very late to the game with Karakuri Packing, others have blogged about it in a more timely fashion like Allard and Kevin.
On the path of exercising the mind. Expanding developing minds and preserving more mature ones.
Showing posts with label Mechanical Puzzle Discord. Show all posts
Showing posts with label Mechanical Puzzle Discord. Show all posts
Wednesday, October 21, 2026
Wednesday, April 8, 2026
Stuffing Puzzles – Xmas Stocking
I’ve seen references to the Xmas Stocking puzzle recently that caused my mind to wander a bit. Since all the pieces were identical and packed in a fairly small box, I was wondering if I could solve it without having the puzzle. After several minutes of determining how the pieces would need to be oriented due to the opening and rotation restrictions, I was able to visualize some assemblies but not how the pieces could be placed in the box. I eventually resorted to using a piece of paper to map out the possible assemblies with no further luck. It’s possible that this is one of those puzzles that requires some assistance like larger tolerances or beveling. I was about to move on when I remembered that I had received some LEGOized hand-me-down puzzles from a generous soul on the Mechanical Puzzle Discord (MPD) server and sure enough, there it was.
Xmas Stocking is a 3D restricted-opening packing puzzle designed by Osanori Yamamoto. It consists of 5 identical Z tetracubes that have to be placed in a 2x3x4 box with 2.5 voxels on the top closed off. The triangular half-square is there to restrict pieces from moving through that square while forcing the voxel underneath to be occupied – assuming that the opening needs to appear completely filled. I was unable to find verification of that requirement, but these types of puzzles seem to require that and it turned out to be the case for this puzzle.
Most of the 3D LEGO packing puzzles that I recently received came solved. However, since they are made from LEGO bricks, you can simply rip off the bottom and dump the pieces without seeing how they are arranged or how they come out. The LEGO bricks used to make the box also included portholes to view the interior of the box, but they are not needed to solve the puzzle.
Being made from LEGO bricks, you know that there are no rotations that can occur with loose tolerances or bevels unless very specific pieces are used or they are doctored in some way. Armed with that assumption, I tested the pieces and could get no further than my pencil and paper analysis. Yes, of course I realized that I was operating with a bad assumption somewhere but was having a difficult time identifying what it was. And then I dropped a single piece in the box and it bounced it’s way into an orientation that I had thought was impossible. Apparently, the Z tetracube has a nice property that gives it a possible rotation that I had not thought of. Now that the secret was out, it only took a couple of minutes to get all 5 Z tetracubes nestled within the box.
I don’t know if it was intentional, but the LEGO version did have the interesting property of still being apparently filled even with all those holes.
Xmas Stocking is a 3D restricted-opening packing puzzle designed by Osanori Yamamoto. It consists of 5 identical Z tetracubes that have to be placed in a 2x3x4 box with 2.5 voxels on the top closed off. The triangular half-square is there to restrict pieces from moving through that square while forcing the voxel underneath to be occupied – assuming that the opening needs to appear completely filled. I was unable to find verification of that requirement, but these types of puzzles seem to require that and it turned out to be the case for this puzzle.
Most of the 3D LEGO packing puzzles that I recently received came solved. However, since they are made from LEGO bricks, you can simply rip off the bottom and dump the pieces without seeing how they are arranged or how they come out. The LEGO bricks used to make the box also included portholes to view the interior of the box, but they are not needed to solve the puzzle.
Being made from LEGO bricks, you know that there are no rotations that can occur with loose tolerances or bevels unless very specific pieces are used or they are doctored in some way. Armed with that assumption, I tested the pieces and could get no further than my pencil and paper analysis. Yes, of course I realized that I was operating with a bad assumption somewhere but was having a difficult time identifying what it was. And then I dropped a single piece in the box and it bounced it’s way into an orientation that I had thought was impossible. Apparently, the Z tetracube has a nice property that gives it a possible rotation that I had not thought of. Now that the secret was out, it only took a couple of minutes to get all 5 Z tetracubes nestled within the box.
I don’t know if it was intentional, but the LEGO version did have the interesting property of still being apparently filled even with all those holes.
| Mail Call |
Subscribe to:
Posts (Atom)
.jpg)
.jpg)